Mts SWIFT 10 ATV Sensor Uživatelský manuál stáhnout pdf (Strana 55)

Select a Zero Method

SWIFT 10 ATV Sensors Setting up the Transducer Interface

Calibration File Elements

The following figure shows some elements of the calibration file:

Typical Calibration File

Items you may edit • OutputPolarities—defines the polarities of the six outputs. Change these

only if your application requires different polarities from those identified on

the transducer label.

• AngleMode—selects the mode used for determining the encoder sine and

cosine.

• AngleFixed—used for non-spinning applications.

• AngleOffset— used for spinning applications. Normally you do not need to

change this value.

• EncoderSize–defines the size of the encoder.

AngleMode=0

AngleOffset=2.10938

AngleFixed=0

EncoderSize=2048

FXPolarity=0

FYPolarity=0

FZPolarity=0

MXPolarity=1

MYPolarity=0

MZPolarity=1

ZFX1=-0.0249317

ZFX2=0.0181511

ZFY1=0.0692687

ZFY2=-0.275767

ZFY3=0.095961

ZFY4=-0.250816

ZFZ1=-0.042539

ZFZ2=0.00590447

FX1Channel=2

FX2Channel=6

FY1Channel=3

FY2Channel=5

FY3Channel=7

FY4Channel=1

FZ1Channel=4

FZ2Channel=0

InputRange=10.0

KFX1=0.497807

KFX2=0.497807

KFY1=0.478072

KFY2=0.478072

KFY3=0.478072

KFY4=0.478072

KFZ1=0.494473

KFZ2=0.494473

KMX=1.61575

KMYX=1.45028

KMYZ=1.45028

KMZ=1.56116

KFXFY=0.00366337

KFXFZ=-0.00238232

KFXMX 0 0209387

Polarity for each output

(0 = normal, 1 = inverted)

Angle Mode (0 = Spinning, 1 = Fixed)

Angle Offset

Fixed Angle

Bridge Zeroes

Do Not Modify

Calibration Gains

Do Not Modify

S10-33

Encoder Size

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 143 144

Komentáře k této Příručce

Žádné komentáře

Mts SWIFT 10 ATV Sensor Uživatelský manuál Strana 55

Komentáře k této Příručce

Související produkty a manuály pro Hardware Mts SWIFT 10 ATV Sensor